Latest stock butt Tenders | Government stock butt Tenders

Central Government/Public Sector

CTN :45163239

22 May, 2026 NA

Varanasi - Uttar Pradesh

Tender For supply of bow hw-602.03 -- fully m cd item as per drg. 11201056300 rev.00 with matl. as per cbom 11201056300 rev.00 , bow hw-602.06 -- fully m cd item as per drg. 11201056600 rev.00 with matl. as per cbom 11201056600 rev.00 , wrench hw-614.01 -- fully m cd item as per drg.21209656100 rev.00 with matl. as per cbom 21209656100 rev.00 , wrench hw-614.02 - - fully m cd item as per drg.21209658200 rev.00 with matl. as per cbom 21209658200 , wrench for balancing weight hw-643.20 -- fully m cd item as per drg. 21208756600 var.00 rev.01 with matl. as per cbom 21208756600 var.00 rev.01 , wrench for balancing weight hw-643.21 -- fully m cd item as per drg. 21208756600 var.01 rev.01 with matl. as per cbom 21208756600 var.01 rev.02 , wrench for balancing weight hw-643.22 -- fully m cd item as per drg. 21208756600 var.02 rev.01 with matl. as per cbom 21208756600 var.02 rev.02 , wrench for balancing weight hw-643.23 -- fully m cd item as per drg. 21208756700 var.00 rev.01 with matl. as per cbom 21208756700 var.00 rev.00 , wrench for balancing weight hw-643.24 -- fully m cd item as per drg. 21208756700 var.01 rev.01 with matl. as per cbom 21208756700 var.01 rev.01 , wrench for balancing weight hw-643.25 -- fully m cd item as per drg. 21208756700 var.02 rev.01 with matl. as per cbom 21208756700 var.02 rev.01 , wrench hw-643.26 - - fully m cd item as per drg. 31208756800 rev.00 with matl. as per cbom 31208756800 rev.00 , wrench hw- 643.27 -- fully m cd item as per drg. 31208756900 rev.00 with matl. as per cbom 31208756900 rev.00 , manual tur. gear for erection hw-681.00 -- fully m cd assembled item as per drg. 31150656000 rev.01 with matl. as per cbom 31150656000 rev.01

Central Government/Public Sector

CTN :43618022

13 May, 2026 71.02 Lacs

Dipka - Chhattisgarh

Tender For bid to ras bid to ras supply of bearing block for tail end shaft complete with bearing housing and dust seal, without bearing suitable for bearing no 23140cck w33 for bec feeder breaker, part no 40061300 or equivalent , sprocket for tailend shaft for bec feeder breaker, part no 40061002 or equivalent , bearing block complete with bearing housing part no 40090800 or equivalent , cover for bearing block non drive end for bec feeder breaker, material en 24, part no 40091000 or equivalent , drive shaft assembly complete with sprockets, shaft, bearing, bearing block, distance piece etc. in assembled condition for bec feeder breaker, part no 40090001 or equivalent , tail end or return shaft assembly complete with sprockets, shaft, bearing, bearing block, distance piece etc. in assembled condition for bec feeder breaker, part no 40060000 or equivalent , bearing block for crusher roll non drive end with bearing housing and dust seal, without bearing suitable for bearing no 23044cck w33 for bec feeder breaker, part no 40041501 or equivalent , bearing block for crusher roll drive end with bearing housing and dust seal, without bearing suitable for bearing no 23044cck w33 for bec feeder breaker, part no 40041601 or equivalent , t head bolt for flight bar assembly of bec feeder breaker, part no 40050203 or equivalent drawing enclosed , nylock nut for bec feeder breaker, part no 40050204 or equivalent drawing enclosed , chain with flight bar assembly consisting of a chain 30x108x196 in mm links confirming to is din 22252 or equivalent nos., for bec feeder breaker, part no 40050000 or equivalent , chain connector suitable for chain 30x108 02 nos. for bec feeder breaker, part no 40050200 or equivalent , flight bar assembly for bec feeder breaker, part no 40050201 or equivalent , cover for crusher roll bearing block for bec feeder breaker, material en 24, part no 40041503 or equivalent , distance race or dust seal for return shaft assembly part no 40060000 of bec feeder breaker, part no 40061500 or equivalent drawing enclosed , distance race or dust seal for drive shaft assembly part no 40090001 of bec feeder breaker, part no 40091300 or equivalent drawing enclosed , tension head bow with tension bolt left for return shaft assembly part no 40060000 of bec feeder breaker, part no 40060200 or equivalent drawing enclosed , tension head bow with tension bolt right for return shaft assembly part no 40060000 of bec feeder breaker, part no 40060300 or equivalent drawing enclosed , key sprockets for return shaft assembly part no 40060000 of bec feeder breaker, part no 40062800 or equivalent drawing enclosed , labyrinth ring for crusher roll assembly part no 40041400 of bec feeder breaker, part no 40041502 or equivalent drawing enclosed

CTN :45138683

18 May, 2026 1.26 Crore

Bathinda - Punjab

Tender For supply and construction of superstructure of ug coy comd post , supply and construction material , supply and construction electronic , supply and construction of earthing items , supply and construction of lightening conductor , supply and construction of furniture items - cement opc 43 grade packed in hdpe bag each 50 kg wt conforming to is 8112-1969 (make-birla gold/ambuja /ultratech/acc/jk/dalmiya) , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40 mm graded , hard core 63-90 mm , stone boulder 9 to 12" , mild steel bars of size 16 mm and above dia conforming to is 432 (part (1) 1982 (make tata/sail/jsw) , mild steel bars of size 12 mm and above dia conforming to is 432 (part 1) 1982 (make tata/sail/jsw) , mild steel bars of size 10mm dia conforming to 15 432 (part 1) 1982 (make tata/sail/jsw) , mild steel bars of size 8 mm and above dia conforming to is 432 (part 1) 1982 (make tata/sail/jsw) , water proofing compound confirming to is 2645-2003 (make pidilite/dr fixit/fevicol) , gl binding wire (tata/sail/jsw) , wooden plank for shuttering lind class wood of size 3.0x0.30x0.026 , wooden scantling various size , steel props of size 2 mtr long. 80 mm dia, adjustable upto 4 mtr height nad as directed , nails various sizes , (a) ms rhs of size 100x50x45 , (b) ms rhs of size 50x25x2.9 , (c) ms rhs of size 96x48x3.2 , (d) ms flat 40x5 mm thick for wind the tata/sail.jsw , (e) ms plate of size 10mm thick , idi ms plate of size 8mm thick , 10) m5 angle of size 40x40xň for cleat , (f) ms plate of size 12mm thick , ms nuts and bolts of length 100mm fully thread suitable for 10 mm dia mats including two numbers of washers and 25mm of shank and two nos of washers 3 mm thick complete ali as directed , ppgi sheet, 0.55 mm thick of size 10ft x3 ft of make sail/tata/jindal incl treating galvanised surface with mordant solution and two coat of synthetic camoglage paint over one coat of red oxide primer of make berger/asian/nerolac) , ppgi noge sheet of 0.50mm thick of 90cm wide of make sail/tata/jindal incl treating galvanised surface with mordant solution and two coat of synthelic camoglage paint over one coat of red oxide primer of make(berger/asian/nerolac) , self taping steel screw half thread with rawl plag of 1 1/2 size (is! marked) (100 nos/pkt) , door size (2000x1000mm double wal ms sheet for door (2mm thick) frame (chowkat) made of steel equal angle iron 55x55x6mm (151 grade) shutter made up of steel equal angie iron frame 35x35x5mm (151 grade) flat con for stiles (75mm width and 5mm thick) holdfast 450mm long welded either side of anglle iron frame including hinges (06 nos) , tower bolt 150mm long 104 nos: bow handles (04 nos) and sliding bolt 12mm dia 300 mm long with lockung arrangernent complete both side and openable outside complete along the wall. , note the door shall be made of steel suitable painted in olive green colour with two coats of red oxide primer , ventilator with grill of size (1500 x 600mm) ventilator (loop hole) frame for steel angle of size 35x35x5mm (1s1 grade) gral made of tmt bar 12mm dia with weiding the items shall be suitably painted with weather resistance and fire prouf paint over one coat of red uxide primer (make tata/spat/sail , acrylic emulsion paint of approved brand on new concrete surface of make berger/asian/nerolag , painting brush 4"(15) marked) , bila white wall care putty (water resistant white cement based putty) for concrete/mortar walls/ceiling make jk putty birla white , cerment hased paint snowcemi make berger/nemlac/asian) , o bound distemper (washable quality) of proprietary brand of (make , ceramic tiles of size 600 mm x 600 mm for floor thickness between 9 to 10 mm thick make (johnson kajana orient) tist quality confrorning to 15 150-2006 , white cement confirming to 18 8042/1969 (make acc/birla white ambuja) , curtain arrangement drapery and ind made of 25 mm dia and 1600 mm long pre coated ms pipe with fancy type ends suitable fing arrangeme

CTN :45038468

12 May, 2026 12.37 Lacs

Fatehgadh - Uttar Pradesh

Tender For corrigendum : supply of bathroom water shower (v2) (q3) , ceramic ( vitreous china ) flushing cisterns for water closets and urinals conforming to is 774 (q3) , soap dish - case (q4) , floor drain traps (v2) (q3) , nozzle gi 15mm , nut bolt for steel window , panel pin with head , pvc lid for water tank 500ltr , pvc lid for water tank 1000ltr , pvc rubber washer for cistern , pvc rubber washer for 15mm bib tap 100 nos in one pkt , screw 20 x 5mm , screw 75mm long , screw 100mm long , screw star head black 3 or 4 inch , screw star head black 1 inch , screw wood steel head 25mm , screw wooden steel 30mm , screw wooden steel 31mm , screw wood steel 35mm , screw wooden steel 50mm , screw wooden steel 63mm , sliding door bolt aluminium 300mm , ss but hinges 75mm , ss door stoper single squate size 5 inch , ss screw diamond 1 inch , ss screw diamond 3 or 4 inch , ss tower bolt 200mm , ss waste coupling 40mm , tack cut nails , welding rod 12 inch , wooden beading half inch x half inch , cushion 40 density size 580 x 560 x 100mm , fevicol sh adhesive , nails wire half inch , nails wire 2 inch , nails wire 3 inch , screw wooden steel 40mm , termite repellent , termite repellent spray machine pressure spray machine , pvc tank lid for storage water tank , sliding door bolt al 300 mm , sliding door bolt aluminium 16 x 200 mm , sliding door bolt aluminium 16 x 250 mm , door stoppers aluminium , ss brackets for drapery rod , gi elbow reducer 20mmx15mm , gi end plug 15mm , gi tank nipple 15mm , gi tank nipple 20mm , paint white 1st grade , steel brackets for whb , ms hasp and staple steel 100 mm , ss drapery rod 20mm dia , door bottom seal aluminium , gi hex nipple 20mm , pvc syphon for llfc , golden fincals for drapery rod , hss tile cutter blade dia 105mm , pvc nylon washer for bib cock , distemper oil bound , gi plug 20mm , ss piano hinges , fevicol sh adhesive , spun yarn , gi plug 25mm , chlorpyrifos 20 percent ec insecticide , chlorpyrifos 50 percent ec insecticide , wooden knobs for cupboard small size , green blaize cloth , teak wood beading plain 25mm , touch wood , varnish , paint thinner , stop cock ci 15 mm , stop cock ci 20 mm , screw 25mm , screw 40mm , alum sliding bolt 300 mm long , ms sliding bolt 300 mm long , ms butt hinges 75 mm , uninal waste pipe with coupling , flash strip 50 mm x 10 mtr long , alum bow handle 150 mm , gi elbow reducer 20mm x 25 mm , gi tubing medium grade 20 mm dia , gi tubing medium grade 25 mm dia , gi tubing medium grade 40 mm dia , gi union 40 mm , ms end plug 15 mm , nipple barrel 15 mm dia x 10mm long , tank nipple 20mm , pvc cover for water storage tank , tank nipple 25mm , ms end plug 20 mm , pvc wall plug rawl plug gitti , teflon tape roll , wood polish pu clear gloss premium , enamel paint white gloss is 2932 , enamel paint blue gloss is 2932 , wood putty ready to use acrylic , screws assorted ss 304 zinc plated , wood adhesive waterproof pva grade //bid details 2 / 79

CTN :45137913

30 May, 2026 NA

Delhi - Delhi

Tender For tender for supply of dental instrument - stainless steel non-perforated completeanatomical impression trays with rimlock for edentulous arches upper andlower sizes 0 , 1 & 5 set of 06 , stainless steel non-perforated completeanatomical impression trays with rimlock for edentulous arches upper and lower sizes 2 , 3 , & 4 set of 06 , stainless steel perforated completeanatomical impression trays with rim lock for edentulous arches upper and lower sizes 1 , 2 , & 3 set of 06 , stainless steel perforated complete anatomical impression trays with rim lock for edentulous arches upper and lower sizes 0 , 4 & 5 set of 06 , stainless steel perforated partial anatomical impression trays with rim lock for edentulous arches upper right left and central sizes 2 & 4 set of 06 , stainless steel perforated partial anatomical impression trays with rim lock for edentulous arches lower right left and central sizes 2 & 4 set of 06 , brush bur , hand wire brass , sanitary waste receptacle with stainless steel body , universal dental x-ray film holding instrument set with guiding ring for round and rectangular cone applicable for iopa , bitewing and endodontic imaging , semi adjustable articulator with mounting plates and face bow complete , flask denture light weight alloy three part , complete with ejection plate and ejection plug , saddle chair divided pneumatic for laboratory / dentist work on 4-6 castors , press flask heavy duty complete , tongs flask lifting , forceps mandible holding ss , scaler , tungsten carbide , no 210 , intrument filling surface treated for reduced stickiness - set of 6 , sterilizer glass bead

CTN :45113477

03 Jun, 2026 4.90 Crore

Ernakulam - Kerala

Tender For supply of fabrication and supply of bow mounted array structure

Central Government/Public Sector

CTN :45114418

18 May, 2026 2.00 Lacs

Nellore - Andhra Pradesh

Tender For supply of boarding uniform with multi utility pockets black flame resistant single , soft wedges , hard wedges , tear gas spray , pepper spray , straight shackle with split pin , swivel piece , bow shackle with spit pin , towing bridle 2 x 1 m legs

Central Government/Public Sector

CTN :45136454

01 Jun, 2026 NA

Jodhpur - Rajasthan

Tender For electrical work in connection with provision of additional pf shelter at ga, nyk, ppr, kxg, bow, mcpe, ums, bktu, blsd, mmy, bkc, mwt, mbt, mbf stations.

CTN :45024802

11 May, 2026 5.00 Lacs

Leh - Jammu And Kashmir

Tender For bid to ras supply of x10ii medium cam , x10 compound sight , x9 scope , x9 arrow rest , peep , x10 compound long rod , x10 compound short rod , x10 v bar , bow stand , x 10 quiver , bow bag rs , spg releaser , elite x 10 arrow , compound vanes

CTN :45122450

18 May, 2026 4.13 Lacs

Malkangiri - Odisha

Tender For supply 6 inch g.i. pipe, g,i, l bow, g.i. flange, lather packing, gate valve laying in trenches and providing joints by welding with two welding beads.

Stock Butt Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector